Mityvac MV8000 Hand Vacuum Pump Kit Automotive Brake Bleeder Diagnostic Test

The Mityvac MV8000 Automotive Tune-Up and Brake Bleeding Kit is a professional hand-operated vacuum pump kit designed for automotive diagnostics, vacuum system testing and convenient one-person brake bleeding.

Featuring the popular Mityvac Selectline hand vacuum pump, this comprehensive kit provides a practical solution for mechanics, automotive technicians and vehicle enthusiasts who need to generate and measure vacuum during servicing and diagnostic procedures.

The MV8000 combines a lightweight, chemical-resistant PVC hand vacuum pump with an integrated 2-inch (50mm) vacuum gauge, allowing users to apply and monitor vacuum without requiring an external compressed-air supply or electrical power source.

Supplied with a 135ml fluid collection reservoir, vacuum tubing, tapered adapters, bleed screw adapters and other useful connections, the kit can be configured for a variety of automotive maintenance tasks.

Its versatility makes it particularly useful for testing vacuum-operated components, checking vacuum lines, investigating mechanical faults and extracting brake fluid during suitable brake bleeding procedures.

The Mityvac MV8000 is an established choice for professional garages, mobile mechanics, vehicle restoration workshops and home automotive maintenance.

Important: The MV8000 is a vacuum-only hand pump kit. It should not be confused with Mityvac Silverline models that provide both vacuum and positive pressure.

Key Features

• Genuine Mityvac MV8000 Automotive Tune-Up and Brake Bleeding Kit
• Selectline hand-operated vacuum pump
• Designed for one-person brake bleeding
• Suitable for a wide range of automotive vacuum diagnostic tests
• Integrated 2-inch / 50mm vacuum gauge
• Lightweight PVC pump construction
• Non-corrosive and chemical-resistant pump design
• Manual operation without electricity or compressed air
• Includes 135ml fluid collection reservoir
• Reservoir supplied with transfer and storage lid
• Includes a selection of tapered tubing adapters
• Includes manifold plugs and bleed screw adapters
• Includes vacuum line T-adapter
• Includes rubber cupped adapter
• Supplied with multiple lengths of connection and vacuum tubing
• Suitable for professional automotive technicians and home workshop users
• Useful for vacuum-operated component testing and brake servicing
• Vacuum generation only – not a positive-pressure pump

Mityvac Selectline Hand Vacuum Pump

At the centre of the MV8000 kit is the Mityvac Selectline hand vacuum pump.

The pump is designed to generate vacuum manually, making it a practical diagnostic tool for use in workshops, garages and locations where powered equipment may not be available.

Its lightweight PVC construction provides resistance to corrosion and suitable automotive workshop chemicals, while keeping the pump comfortable to handle during routine servicing.

The integrated 50mm vacuum gauge allows the technician to observe vacuum levels while testing components or performing maintenance.

Because the pump is manually operated, vacuum can be applied progressively and monitored during the procedure.

This is especially useful when checking whether a component responds correctly to applied vacuum or whether a vacuum circuit can retain vacuum.

One-Person Brake Bleeding

One of the principal applications of the Mityvac MV8000 is one-person brake bleeding.

Traditional brake bleeding methods often require a second person to operate the brake pedal while another technician opens and closes the bleed screw.

The MV8000 offers an alternative method by using a hand-operated vacuum pump to draw brake fluid and trapped air through a suitable brake bleed screw.

The included 135ml fluid reservoir collects extracted brake fluid, helping prevent fluid from entering the pump.

The kit also includes different bleed screw adapters and connection tubing to accommodate a range of suitable vehicle applications.

This makes the MV8000 useful for routine brake fluid servicing, vehicle maintenance and restoration work.

Always follow the vehicle manufacturer's specified brake bleeding procedure. Some braking systems, particularly certain ABS and electronically controlled systems, may require additional diagnostic equipment or a specific bleeding sequence.

Automotive Vacuum System Diagnostics

The Mityvac MV8000 is also designed for a wide range of diagnostic checks involving vacuum-operated automotive components.

A hand vacuum pump allows technicians to apply a controlled vacuum directly to suitable components and observe their response.

Depending on vehicle design and manufacturer specifications, potential applications include:

• Vacuum hose and connection testing
• Vacuum-operated actuator testing
• Vacuum diaphragm testing
• Vacuum control valve checks
• Vacuum reservoir testing
• Selected emissions control component testing
• Mechanical vacuum circuit fault diagnosis
• Checking whether suitable components retain applied vacuum
• General automotive vacuum troubleshooting

The exact test procedure and expected readings depend on the vehicle and component being examined.

Integrated 2-Inch / 50mm Vacuum Gauge

The Selectline pump incorporates a 2-inch (50mm) vacuum gauge.

The gauge provides a visual indication of the vacuum being generated, allowing the operator to monitor the test as it is performed.

This is useful when checking the response of vacuum-operated components or determining whether a system maintains vacuum over a specified period.

The gauge also helps the operator apply vacuum progressively rather than relying on estimation alone.

For diagnostic work, always refer to the relevant vehicle service information for the correct vacuum level and test method.

Lightweight, Chemical-Resistant PVC Construction

The MV8000 features a PVC hand pump body designed to be lightweight, non-corrosive and resistant to suitable workshop chemicals.

The material helps provide practical durability for routine automotive diagnostic and maintenance work.

The lightweight construction also makes the pump convenient for mobile mechanics, workshop technicians and users carrying out servicing away from a fixed workbench.

Although the pump is designed for automotive workshop use, fluids should be collected in the supplied reservoir rather than drawn directly into the pump mechanism.

135ml Fluid Collection Reservoir

The kit includes a 135ml fluid reservoir bottle with a transfer and storage lid.

This reservoir is particularly useful during vacuum-assisted brake bleeding, where brake fluid needs to be collected as it is extracted from the hydraulic system.

The reservoir provides a collection point between the brake bleed connection and the hand pump.

The supplied lid allows the reservoir to be closed for appropriate handling and temporary storage during servicing.

The reservoir should be monitored throughout use and emptied safely before it becomes overfilled.

Brake fluid should be handled and disposed of according to applicable safety and environmental requirements.

Complete MV8000 Kit Contents

The Mityvac MV8000 Automotive Tune-Up and Brake Bleeding Kit includes the following equipment and accessories:

• 1 x Selectline PVC Hand Vacuum Pump
• Integrated 2-inch (50mm) vacuum gauge
• 1 x 135ml Fluid Reservoir Bottle
• Includes transfer and storage lid
• 4 x Tapered Tubing Adapters
• For tubing sizes approximately 0.09" to 0.50" (2.3mm to 13mm)
• 2 x Tapered Manifold Plugs
• 2 x Tapered Bleed Screw Adapters
• 2 x Universal Bleed Screw Adapters
• 1 x Vacuum Line T-Adapter
• 1 x 5/32" (4mm) to 1/4" (6.4mm) Tubing Adapter
• 1 x Rubber Cupped Adapter
• 2 x Connection Tubes – 1/4" (6.4mm) Diameter x 24" (610mm) Long
• 1 x Connection Tube – 1/4" (6.4mm) Diameter x 1½" (40mm) Long
• 1 x Fluid Pick-Up Tube – 1/4" (6.4mm) Diameter x 3⅝" (90mm) Long
• 1 x Vacuum Test Tube – 5/32" (4mm) Diameter x 3" (75mm) Long

The range of included adapters and tubing allows the kit to be configured for different compatible automotive diagnostic and brake servicing tasks.

Multiple Adapters for Versatile Connections

The MV8000 is supplied with several styles of connection adapter to support a range of vacuum testing and brake bleeding applications.

The tapered tubing adapters accommodate different hose sizes, while the manifold plugs and vacuum line T-adapter help configure suitable vacuum test connections.

The tapered and universal bleed screw adapters provide connection options for brake bleeding procedures.

The rubber cupped adapter and included tubing further extend the kit's versatility for suitable vacuum testing tasks.

The correct adapter should always be selected to provide a secure connection without damaging hoses, fittings or components.

Manual Operation – No Compressor Required

The Mityvac MV8000 operates entirely by hand.

It does not require an air compressor, electrical power supply or battery to generate vacuum.

This makes it convenient for:

• Mobile mechanics
• Roadside and field maintenance
• Professional garages
• Home automotive workshops
• Vehicle restoration projects
• Workshop diagnostic testing

Its portable manual design allows technicians to perform suitable vacuum checks and brake bleeding procedures wherever the necessary working conditions and safety precautions can be maintained.

Professional Applications

• The Mityvac MV8000 is particularly suitable for:
• One-person brake bleeding
• Automotive vacuum diagnostics
• Vacuum hose testing
• Vacuum-operated actuator checks
• Vacuum diaphragm testing
• Brake fluid servicing
• Vehicle tune-up procedures
• Mechanical fault finding
• Professional garage maintenance
• Mobile mechanic work
• Fleet vehicle servicing
• Classic car restoration
• Motorcycle servicing where compatible
• General home workshop automotive maintenance

Technical Specifications

• Brand: Mityvac
• Manufacturer part number: MV8000
• Product type: Automotive Tune-Up and Brake Bleeding Hand Vacuum Pump Kit
• Pump range: Selectline
• Pump operation: Manual hand-operated
• Pump function: Vacuum generation
• Positive pressure generation: No
• Pump body material: PVC
• Pump construction: Lightweight, non-corrosive and chemical resistant
• Gauge diameter: 2" / 50mm
• Fluid reservoir capacity: 135ml
• Fluid reservoir lid: Transfer and storage lid included
• Tapered tubing adapters: 4
• Tapered tubing adapter size range: 0.09" to 0.50" / approximately 2.3mm to 13mm
• Tapered manifold plugs: 2
• Tapered bleed screw adapters: 2
• Universal bleed screw adapters: 2
• Vacuum line T-adapter: 1
• Tubing reduction adapter: 5/32" (4mm) to 1/4" (6.4mm)
• Rubber cupped adapter: 1
• Long connection tubes: 2 x 1/4" (6.4mm) x 24" (610mm)
• Short connection tube: 1 x 1/4" (6.4mm) x 1½" (40mm)
• Fluid pick-up tube: 1 x 1/4" (6.4mm) x 3⅝" (90mm)
• Vacuum test tube: 1 x 5/32" (4mm) x 3" (75mm)
• Primary applications: Brake bleeding and automotive vacuum diagnostics

About Mityvac

Mityvac is a well-established name in automotive diagnostic and maintenance equipment, particularly hand-operated vacuum pumps, vacuum testing kits and brake bleeding tools.

Mityvac equipment is widely used by professional automotive technicians, mechanics and workshop users for testing and servicing vehicle systems.

The brand's range includes vacuum pumps, combined vacuum and pressure testing equipment, fluid handling tools and specialist automotive maintenance accessories.

The MV8000 Selectline kit is one of the brand's established hand vacuum pump solutions, combining a manual pump, vacuum gauge, fluid reservoir and a selection of adapters for practical automotive maintenance work.

Important Information

• Genuine Mityvac MV8000 Automotive Tune-Up and Brake Bleeding Kit
• Includes Selectline hand vacuum pump
• Integrated 2-inch / 50mm vacuum gauge
• 135ml fluid reservoir included
• Includes tubing, adapters, manifold plugs and brake bleeding accessories
• Designed for one-person brake bleeding and automotive vacuum testing
• Vacuum-only operation
• This is not a dual vacuum and pressure pump
• No compressor or external electrical supply required
• Always follow the vehicle manufacturer's brake bleeding and diagnostic procedures
• Some ABS and electronically controlled brake systems may require additional equipment or procedures
• Maintain the correct brake fluid level in the vehicle's master cylinder reservoir during bleeding
• Do not allow the collection reservoir to overfill
• Prevent brake fluid and other liquids from entering the pump mechanism
• Use only fluids and chemicals compatible with the equipment and its components
• Always use the correct brake fluid specification for the vehicle
• Brake fluid can damage painted surfaces and should be handled carefully
• Dispose of used brake fluid responsibly
• Inspect tubing, adapters and connections before use
• Do not use damaged or leaking equipment
• This listing is for the complete Mityvac MV8000 Selectline hand vacuum pump kit with the accessories detailed above.